Glass shower doors are a wonderful way to allow some light into your bathtub or shower area.
Set the Side Rails in
Pierce appropriate openings right into the wall surfaces for the side rails. Run a grain of silicone on the bottom of the limit item. Put it in place and also tape it down till the side rails are in location. Tap a plastic support right into the pre-drilled openings in the tile. Slide side rails right into threshold and also screw to the wall surface anchors with stainless-steel screws.
Insert the Rubber Spacers
Decline rubber spacers in the network on the left side of the threshold to hold the stationary panel of the door.
Attach the Staying Bed rails
Area the glass stationary panel, and also slide it right into the side rail. Attach the center rail and also leading rail to the side panel.
Break fillers right into the limit and also the top rail where the swing door will certainly go.
Apply the Glazing Strip
Utilize a shim (not metal) to push the glazing strip into the channel on both sides of the fixed glass panel.
Attach the Hinges to the Bottom Rail
Generate the swing door, connecting the joint down rail and also threshold and also breaking it right into location.
Useful Links: https://www.sheerglass.com/
No comments:
Post a Comment